首页联系我们
首页 > 国际标准化 > 国际标准征求意见 > ISO国际标准CD、DIS阶段投票征求意见表格(模板)

国际标准征求意见

ISO国际标准CD、DIS阶段投票征求意见表格(模板)

  2014/5/19   浏览:770
 

Template for comments and secretariat observations

Date: 2014-04-23

Document: N12

Project: – ISO/CD 13061-12

 

 

MB/NC1

Line number

(e.g. 17)

Clause/ Subclause

(e.g. 3.1)

Paragraph/ Figure/ Table/

(e.g. Table 1)

Type of comment2

Comments

Proposed change

Observations of the secretariat

 

 

CN

Foreword

ED

Part 11: Determination of static impact indentation

Part 11: Determination of resistance to impact indentation

CN

16

6.3.3

TE

“Interval of 8h” should be in accordance with each other of all parts in “Physical and mechanical properties of wood – Test methods for small clear specimens” other standards.

Change to “interval of 24h”, as it is in other FDIS

CN

8.1

para. 1

ED

The static hardness, HW, of each test piece at a moisture content, W, at the time of test,

Change “ HW  to “Hω”. Change “W” to  ω

CN

35

8.1

Equation (1)

ED

HW” Should be changed to “Hω

Change “ HW  to “Hω

CN

8.2

para. 1, Equation (2)

ED

Change “ HW  to “Hω”. Change “W” to  ω

CN

8.2

“nationally or internationally recognized method” is too vague; shall be obtained from national standards.

Change clause 8.2 to:

8.2 When necessary, the static hardness of the test piece Hω shall be adjusted to a 12 % moisture content to an accuracy of 1 N by the following formula which is valid for a moisture content of (12 ± 3) %:

(2)

     (2)

Where;

   is the correction factor for moisture content, whose value shall be obtained from national standards.

CN

16

8.3

TE

“1 KJ/m2 (MPa)” should be “1N”

Change “1 KJ/m2 (MPa)” to “1N”

 

 

1    MB = Member body / NC = National Committee (enter the ISO 3166 two-letter country code, e.g. CN for China; comments from the ISO/CS editing unit are identified by **)

2    Type of comment:     ge = general        te = technical      ed = editorial

 

技术委员会标准化动态国内标准化国际标准化标准服务联系我们

CopyAllRight © 2014  版权所有: 全国人造板标准化技术委员会  京ICP备07017635号